3DMakerpro

What to know about shopping at 3DMakerpro

3DMakerpro makes portable 3D scanners, and the lineup ladders by both size and job. The handheld scanner lines — Fox, Seal, Mole, Lynx, Moose, Toucan and the flagship Whale — cover desktop-scale objects for 3D printing, reverse engineering and design work, while the Raven, Eagle and Hawk LiDAR devices step up to rooms, vehicles and building-scale capture. Around them sit the accessories that decide whether a scan actually works: turntables for small objects, tripods, scanning spray for shiny or dark surfaces, and color kits.

The spec that matters is not resolution in isolation but what you intend to scan. A handheld unit built for a hand-sized part will struggle with a car, and a LiDAR device built for spaces is overkill for a printed miniature. Work backwards from the object size and the surface — glossy, transparent and very dark materials are the hard cases, which is exactly why scanning spray is sold alongside the hardware rather than as an afterthought.

Software is bundled rather than separate, and it is a real part of the value: JMStudio and RayStudio handle capture and mesh processing, and Geomagic Wrap appears on the higher tiers for heavier post-processing. Factor that in when comparing against a cheaper device that expects you to buy a processing package on top.

On cost, the range is wide — accessories start around $23 while professional LiDAR units reach into four figures, with most handheld scanners landing between roughly $200 and $700 at the time of writing. The brand runs sitewide sale events rather than discounting continuously, and the stackable dollar-off codes work on top of those events, so the sale periods are when a code is worth the most. If you are buying a specific model, check whether the code excludes accessories before adding a turntable or tripod to the same order.

— MoneySaverCodes Team